Centrifugal mineral slurry pumps series AH(R) used for chromite plant tailings
1.Details of Naipu AH/AHR slurry pumps for chromite plant tailings:
Size range (discharge) 1 to 18 (25 mm to 450 mm)
Capacities to 5,000 m3/hr (to 22,000 gpm)
Heads to 73 m (to 240 ft)
2. Features of Naipu AH/AHR slurry pumps :
AH(R) series centrifugal slurry pump frame plates have replaceable wear-resistant metal liners or corrosion-resisting natural rubber liner. If AH(R) series with metal liner ,the impellers&volute liners are made of wear-resistant metal(such as A05,A49,and other high chrome metal). If with rubber liners, usually the material adopt R26, R24, R55 and other natural rubber .
AH(R) series centrifugal slurry pump bearing assembly use cylindrical structure, adjusting the space between impeller& front liner easily, being removed completely when being repaired. Grease lubrication.
AH(R) series centrifugal slurry pump shaft seal could use the packing seal, expeller seal and mechanical seal. One pump also can be use packing seal with expeller seal together.
The discharge outlet can be positioned at intervals of 45 degrees by request and oriented to any 8 positions to suit installations and applications.
AH(R) series centrifugal slurry pump can be installed in multistage series to meet the delivery for long distance.
AH(R) series centrifugal slurry pump drive types, such as direct coupling drive(DC), V belt drive(CR, CV, ZV), etc.
3.Application for Naipu AH/AHR centrifugal slurry pumps :
Paper and Pulp
Bottom Boiler and Fly Ash
4. Technical specification of Naipu AH slurry pumps
We also accept OEM sparts parts,even compelete slurry pumps with special material
Wet end parts(impeller/liners)
Grey iron/ductile iron
High chrome(A05/A07/A49/A51) Rubber(R08/R26/S42/S31,R12/R21,etc)